Why not learn more about Motorcycles?

How to Paint Your Motorcycle Parts for Restoration

During the process of motorcycle restoration, you will be faced with various challenges. A major challenge which you will face includes surface finish of different parts with the various motorcycle paint colors. Whether plated, painted or powder-coated, it is difficult to decide on which part of painting or not to paint. The final decision will have a hand to do with the cost and reliability of the component.

As the owner of the motorcycle, you will have to decide on whether to have a frame powder coated instead of painting. You can choose the motorcycle paint the frame yourself when costs are a major deterrent.

There are various mounting brackets which you can access for your old bike. A major source for parts of your motorcycle includes the batteries, horns, and seats which are spread out..The costs incurred during the restoration process can be reduced when you choose to paint by yourself.

There are various auto stores which stock a broad range of spray paints which can be accessed through pressurized cans. However, there are various types of paints which are limited at various outlets but are acceptable inclusive of brackets.

During the preparation process, most painting experts argue that it is the core part of getting a good finish. The level of work needed for applying the final paint finish is little when compared to the needed preparation. You should start by cleaning your bike. Taking pictures of the various parts when you disassemble can simplify the process.

When spraying the different components of your bike during the preparation process , you should wear latex gloves. It is important to protect your hands from the oils in hands and natural greases in the different parts. You can encounter skin irritations when the spray products come into contact with your skin.

Cleaning the different components of the bike is the first step inside a degreasing tank. You should use a brake cleaner which does not leave behind a greasy residue.

You must perform grit blasting for components which exhibit old paint or rust. Wire brush the various items with the use of a dry paper. You can blast the different components using baking soda which is less aggressive.

Before applying the filler material, you should consider spraying the area with a primer especially an etching primer. It is also highly recommended to powder the coat the components before sealing the components before applying any filler material.

The final procedure is painting of the components in application of the topcoat. You should be conversant with the various rules which surround spray painting. You can practice spray painting with the different components with the same components which make up the paint.
Services: 10 Mistakes that Most People Make
The 5 Laws of Motorcycles And How Learn More